Solvent-Based Screen Printing InksPad Printing Inks

Norilit® U-SG

Norilit® U-SG is suitable for printing on metals, pre-treated polyester films, pre-treated polyolefins, polycarbonate, powder coated and lacquered metals.

Get in touch
Choose a category

Area of Application and General Characteristics

Great advantage of the ink system Norilit® U-SG is the good adhesion to untreated polyester films. For that reason Norilit® U-SG is recommended for membrane switches, front plates and decorative films in the production of gadgets and instruments.

The ink films show excellent resistance to yellowing, household cleaners, oils, lubricants, fuels and alcoholic solutions. Norilit® U-SG resists 220 °C (428 °F) for a limited time (a few minutes).

Finish

Satin glossy

Further information can be found in our technical data sheets in the Downloads section

PropertiesNorilit® U-SG
One-Component-Ink
Two-Component-Ink
Three-Component-Ink
Substrates
Acrylics
Acrylics (PMMA)
Coated Substrates
Thermosetes
Glass / Ceramics
Wood
Wood, plywood
Leather
Metal / nonferrous Metal
Paper
Polyamide
Polycarbonate
Polyester untreated
Polyester pre-treated
Polyethylene pre-treated
Polypropylene untreated
Polypropylene pre-treated
Polystyrene, ABS, SAN
Polyurethane
PVC rigid
PVC plasticised
Drying
Slow
Medium
Physical
Physically reactive
Fast
Grade of gloss
glossy
high gloss
matt
satin gloss
Auxiliaries
Hardener
002 002
Thinner / Percentage (%)
30-35
Thinner series
Further processing
outdoor resistant
heat curable up to °C
180 180
high frequency sealing
heat sealing
thermo forming
ApplicationsNorilit® U-SG