Solvent-Based Screen Printing InksPad Printing Inks

Norilit® CS

Norilit® CS is a solvent-based ink system, which is mainly used for printing on lacquered and powder-coated sheet metal, UV-lacquered substrates and lacquered wood.

Choose a category

Area of Application

Norilit® CS is a solvent-based ink system, which is mainly used for printing on lacquered and powder-coated sheet metal, UV-lacquered substrates and lacquered wood. Additionally, good results are provided, when screen printing on paper, paperboard and card-board. 

The screen printing ink is characterized by good screen open time, fast drying and good blocking resistance. For outdoor use Norilit® CS shows medium resistance which is strongly dependent on the quality of the substrate.

Finish

Satin glossy

Further information can be found in our technical data sheets in the Downloads section

PropertiesNorilit® CS
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics
Acrylics (PMMA)
Coated Substrates
Thermosetes
Glass / Ceramics
Wood
Wood, plywood
Leather
Metal / nonferrous Metal
Paper
Polyamide
Polycarbonate
Polyester untreated
Polyester pre-treated
Polyethylene pre-treated
Polypropylene untreated
Polypropylene pre-treated
Polystyrene, ABS, SAN
Polyurethane
PVC rigid
PVC plasticised
Drying
Slow
Medium
Physical
Physically reactive
Fast
Grade of gloss
glossy
high gloss
matt
satin gloss
Auxiliaries
Hardener
002
Thinner / Percentage (%)
20
Thinner series
Further processing
outdoor resistant
heat curable up to °C
high frequency sealing
heat sealing
thermo forming
ApplicationsNorilit® CS