Water-Based Screen Printing Inks
Aqua-Jet® WT
Water-based screen printing ink for printing on wood and plastics (only after pretests!) for indoor application, especially for toys. The ink line is free of the solvent N-Methyl-2-Pyrrolidon (NMP) and free of Organotin Compounds.
Get in touchChoose a category
Area of Application and General Characteristics
Water-based screen printing ink for printing on wood and plastics (only after pretests!) for indoor application, especially for toys. The ink line is free of the solvent N-Methyl-2-Pyrrolidon (NMP) and free of Organotin Compounds.
Light Fastness
Aqua-Jet® WT provides very good light-fastness, except the fluorescent inks.
Further information can be found in our technical data sheets in the Downloads section
PropertiesAqua-Jet® WT
Outdoor resistance
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics
Cotton, Linen
Cotton mix
Wood
Synthetics
Paper, Cardboard
Polycarbonate
Polyester pre-treated
Polyolefine pre-treated
Polystyrene, ABS, SAN
PVC rigid
PVC plasticised
Drying
Finish
glossy
Outdoor resistance
short term
Physical
Physically reactive
Grade of gloss
satin gloss
Auxiliaries
Defoamer
1% L 36273
Crosslinker
L 47716
Thinner
print ready
Retarder
VZ 100
ApplicationsAqua-Jet® WT
Downloads
General DownloadsWater-Based Screen Printing Inks
- Application Chart for Water-Based Screen Printing Inks32 KB
- Auxiliary Products for Water-Based Screen Printing Inks - 03/202255 KB
- Printing with Water-Based Screen Printing Inks - 09/2019200 KB
- Product Range Water-Based Screen Printing Inks - 01/20232 MB
- General Information on Screen Printing Inks - 09/201964 KB
- Proell US Form for technical inquiries1,023 KB
