Water-Based Screen Printing Inks

Aqua-Temp SIG

Aqua-Temp SIG L 68742 stoving lacquer for glass

Get in touch
Choose a category

Aqua-Temp SIG L 68742 is a water-based stoving lacquer for glass decoration. The screen printing lacquer can be used for second surface printing of decorated glass panels and displays for household appliances.

The water-based two-component ink shows excellent printability and good screen opening properties.

Aqua-Temp SIG is based on organic binding agents and is formulated user-friendly without solvents.

The printed and stoved ink layers show excellent resistances towards chemical cleaners and solvents.

The protective lacquer has been developed as final overprinting lacquer. The stoved screen printing lacquer shows excellent scratch resistances, comparable with hard coated surfaces. Subjacent ink layers are perfectly protected during the mounting process, e.g. glass panels for refrigerators.

The lacquer can also be used for overprinting of solvent-based ink systems (not yet stoved) such as NoriGlass OR, NoriGlass TP and ZK-Two-Component Ink.

Proell-Aqua-Temp-SIG-test-motive-black-over-printed-with-protective-lacquer

Further information can be found in our technical data sheets in the Downloads section

PropertiesAqua-Temp SIG
Outdoor resistance
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics
Cotton, Linen
Cotton mix
Wood
Synthetics
Paper, Cardboard
Polycarbonate
Polyester pre-treated
Polyolefine pre-treated
Polystyrene, ABS, SAN
PVC rigid
PVC plasticised
Drying
Finish
Outdoor resistance
Physical
Physically reactive
Grade of gloss
satin gloss
Auxiliaries
Defoamer
Crosslinker
L 47716
Thinner
Retarder
VZ 100
ApplicationsAqua-Temp SIG