Water-Based Screen Printing Inks
Aqua-Jet® KF
Screen printing ink for rigid substrates, such as PS, PMMA, PC, and PVC
Get in touchChoose a category
Area of Application and General Characteristics
Water based screen printing ink for hard printing substrates such as polycarbonate, acrylic, rigid PVC, polystyrene, ABS, pre-treated polyester and pre-treated polyolefines after testing.
Finish
Basic colors have a satin gloss finish. If necessary, a matt finish can be obtained by adding 1-2 % Matting Agent 2009.
Further information can be found in our technical data sheets in the Downloads section
PropertiesAqua-Jet® KF
Outdoor resistance
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics
Cotton, Linen
Cotton mix
Wood
Synthetics
Paper, Cardboard
Polycarbonate
Polyester pre-treated
Polyolefine pre-treated
Polystyrene, ABS, SAN
PVC rigid
PVC plasticised
Drying
Finish
satin gloss
Outdoor resistance
Physical
Physically reactive
Grade of gloss
satin gloss
Auxiliaries
Defoamer
1 % L 36273
Crosslinker
2% Crosslinker WB 001
L 47716
max. 20%
Thinner
5 - 10% Water
Retarder
VZ 100
max. 5%
General DownloadsWater-Based Screen Printing Inks
- Application Chart for Water-Based Screen Printing Inks33 KB
- Auxiliary Products for Water-Based Screen Printing Inks - 12/202355 KB
- Printing with Water-Based Screen Printing Inks - 09/2019200 KB
- Product Range Water-Based Screen Printing Inks - 01/20242 MB
- General Information on Screen Printing Inks - 09/201964 KB
- Proell US Form for technical inquiries1,023 KB
